The Safety Pelican
Schedule service

ECOFEX fire extinguishers: identification and service guide

Identify an ECOFEX foam, powder or CO₂ extinguisher by medium, rating, model and condition before competent service or replacement.

ECOFEX is an Ecosafety fire-equipment brand covering portable extinguishers and hose reels. The current published extinguisher range includes foam, dry powder and carbon dioxide in different volumes, fire classes and some frost-resistant versions. Those choices address different hazards and cannot be selected from brand or cylinder colour alone.

The Safety Pelican services ECOFEX equipment within its current authorised scope in Sint Maarten. Product sales are handled through The Marine Store by SM Caribbean. For service or replacement planning, send the exact nameplate and application so the station can confirm the appropriate technical route.

Sources checked August 2, 2026

Record medium, rating and approval from the delivered unit.

Photograph the extinguisher, operating label, model, serial number, medium, nominal charge, fire rating, approval, temperature range, manufacture or pressure-vessel markings and service tag. Include the hose, nozzle, gauge, pin, seal, base and bracket. If the unit is described as fluorine-free, frost-resistant or suitable for a special use, capture the exact marking or data sheet that supports that claim.

Do not reduce the inventory to 'ECOFEX 6 kg'. Mass does not establish agent, rating or suitability. Link each serial number to its location and credible hazard. A foam unit in an office, a powder unit in a plant area and a CO₂ extinguisher near electrical equipment have different strengths, limitations and post-discharge consequences.

  • Model, serial and medium
  • Charge and fire rating
  • Approval and temperature range
  • Special product claims
  • Location and intended hazard

Confirm that the extinguishing medium still fits the application.

Ecosafety publishes ECOFEX foam—including fluorine-free or PFAS-free options—powder and CO₂ units in multiple sizes and ratings. A responsible choice still begins with fuel class, electrical energy, occupied-space effects, clean-up consequence and the applicable premises or vessel rule. The brand portfolio supplies options; it does not make one medium universal.

Review placement when room use, machinery, cooking equipment, battery systems or stored materials change. On vessels, check flag requirements and the fire-control plan. In homes, commercial premises and industrial sites, use a competent fire-risk assessment. A current service label cannot correct a medium that is poorly matched to the hazard.

  • Fuel and electrical hazards
  • Occupied-space effect
  • Residue and clean-up
  • Temperature and environment
  • Current risk assessment or vessel plan

Inspect the whole extinguisher, including hidden and mounted surfaces.

Routine checks cover location, access, instructions, pin and seal, apparent pressure or fullness, hose and nozzle, cylinder condition and due dates. Remove the unit from its bracket only as the inspection procedure allows and look at the base, back and support points where moisture and abrasion collect. In marine service, salt, vibration and enclosed lockers deserve particular attention.

Competent maintenance can require opening, agent control, component replacement, recharge or hydrostatic testing under the applicable standard and manufacturer data. Never mix powders or foams, top up an agent of uncertain identity, test-fire a unit or replace pressure components without the correct procedure and equipment.

  • Access and legible instructions
  • Pin, seal, pressure and fullness
  • Base and bracket corrosion
  • Hose and nozzle condition
  • Competent recharge and pressure work

Bring the unit, application and records into one decision.

Send nameplate photographs, vessel or premises location, hazard, previous service record and known defects. Report any discharge, pressure loss, corrosion, heat exposure, missing seal, damaged hose or unsuitable bracket. If replacement is being considered, provide the required rating, medium constraints and approval rather than asking only for the same physical size.

At return, compare serial number, medium, rating and service record, then restore the correct mounting and signage. Update the equipment register and any inspection schedule. Where the assessment shows the existing type is wrong for the application, coordinate supply through The Marine Store rather than repeatedly servicing an unsuitable unit.

  • Nameplate and condition photographs
  • Location and hazard
  • Previous service record
  • Required medium, rating and approval
  • Register and mounting update

Official sources

Check the current authority text.

Requirements can change and may depend on the vessel, flag, class and operation. Use these links to verify the current source.

Have a question?Send us a message